Cisco Linksys SPA9000 - Manual (Page 195)

6-47
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
Line 1/2/3/4 Tab
Line 1/2/3/4 Tab
This section describes the fields for the following headings on the Line 1, Line 2, Line 3, and Line 4
tabs:
• Line Enable, page 6-47
• Network Settings, page 6-47
• SIP Settings, page 6-48
• Subscriber Information, page 6-50
• Dial Plan, page 6-52
Note In a configuration profile, the Line parameters must be appended with [1] or [2] to identify the line to
which the setting applies.
Line Enable
Network Settings
Field Description
Line Enable To enable this line for service, select yes. Otherwise, select no.
The default is yes.
Field Description
SIP ToS/DiffServ Value TOS/DiffServ field value in UDP IP packets carrying a SIP message.
The default is 0x68.
SIP CoS Value [0-7] CoS value for SIP messages.
The default is 3.
RTP ToS/DiffServ Value ToS/DiffServ field value in UDP IP packets carrying RTP data.
The default is 0xb8.
RTP CoS Value [0-7] CoS value for RTP data.
The default is 6.