Cisco Linksys SPA9000 - Manual (Page 59)

2-29
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 2 Getting Started
Advanced Methods of Configuration
1
next-available-user-id
1
next-available-user-id
1
next-available-user-id
client-station-mac-address
1
10
tftp://spa-9000-ip-address:69/cfg/generic.xml
1
The following XML file is served by the SPA9000 when a client station requests /cfg/generic.xml:
0
3600
spa-9000-admin-passwd
phone-ext-password
spa-9000-ip-address:proxy-listen-port
spa-9000-ip-address:proxy-listen-port
vmm
vm
vm
spa-9000-multicast-address
phone-upgrade-rule
phone-dial-plan
1
1
time-zone
daylight-saving-time
Table 2-3 lists the variables used in these XML files.
Table 2-3 Variables Used in XML Configuration Files
Variable Description
spa-9000-ip-address IP address of the SPA9000 SIP Proxy.
proxy-listen-port Port at which the SPA9000 SIP Proxy is listening. This value is
configured in .
client-station-mac-address This is the MAC address of the client station who is requesting the
profile /cfg/init_$MA.xml (in other words, the $MA portion of the
requested filename).
next-available-user-id The current value of .
Phone-upgrade-rule Upgrade rule to be used by the client stations. This value is
configured in .
Phone-dial-plan Dial plan to be used by the client stations. This value is configured
in .
time-zone value that is configured on the SPA9000.
daylight-saving-time value that is configured on the
SPA9000.
phone-ext-password value configured on the SPA9000.