Cisco Linksys SPA9000 - Manual (Page 178)

6-30
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
Regional Tab
Cfwd All Deact Code Cancels call forwarding of all calls.
The default is *73.
Cfwd Busy Act Code Forwards busy calls to the extension specified after the activation code.
The default is *90.
Cfwd Busy Deact Code Cancels call forwarding of busy calls.
The default is *91.
Cfwd No Ans Act Code Forwards no-answer calls to the extension specified after the activation code.
The default is *92.
Cfwd No Ans Deact Code Cancels call forwarding of no-answer calls.
The default is *93.
Cfwd Last Act Code Forwards the last inbound or outbound calls to the extension specified after the activation
code.
The default is *63.
Cfwd Last Deact Code Cancels call forwarding of the last inbound or outbound calls.
The default is *83.
Block Last Act Code Blocks the last inbound call.
The default is *60.
Block Last Deact Code Cancels blocking of the last inbound call.
The default is *80.
Accept Last Act Code Accepts the last outbound call. It lets the call ring through when do not disturb or call
forwarding of all calls are enabled.
The default is *64.
Accept Last Deact Code Cancels the code to accept the last outbound call.
The default is *84.
CW Act Code Enables call waiting on all calls.
The default is *56.
CW Deact Code Disables call waiting on all calls.
The default is *57.
CW Per Call Act Code Enables call waiting for the next call.
The default is *71.
CW Per Call Deact Code Disables call waiting for the next call.
The default is *70.
Block CID Act Code Blocks caller ID on all outbound calls.
The default is *67.