Cisco Linksys SPA9000 - Manual (Page 122)

4-32
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 4 Configuring SPA9000 Features
Enhancements in Release 5.1
Configuring the Streaming Audio Server
The following provides step-by-step procedures for implementing a SAS with an external music source.
Step 1 Connect an RJ-11 adapter between the music source and an FXS port on the
SPA9000 (Phone 1 or Phone
2).
Step 2 On the administration web server, click the SIP tab and scroll down to the Streaming Audio Server
section (see
Figure 4-16 ).
Figure 4-16 Enabling the Streaming Audio Server
Step 3 On the SAS Enable pull-down selection list, select yes.
Step 4 In the MOH Server field of the Call Feature Settings section, enter the User ID configured for the line
attached to the audio source.
Step 5 Click Submit All Changes.
Enhancements in Release 5.1
This section describes feature enhancements introduced in Release 5.1 of the SPA9000. It includes the
following topics:
• Bridge Mode, page 4-32
• REGISTER Enhancement, page 4-33
• Renew DHCP On SIP Request Timeout, page 4-34
In addition, Release 5.1 introduces downloadable prompts for the Auto-Attendant, a feature that is useful
for localization of the SPA9000. For more information about this feature, see the
“Downloading
Prompts” section on page 5-8 .
Bridge Mode
In Release 5.1, the and the parameters were added to
improve the way that the SPA9000 handles call forwarding and call transfer. This section describes the
added functionality provided and includes the following topics:
• Call Forward Bridge Mode, page 4-33
• Call Transfer Bridge Mode, page 4-33