Downloading prompts, Downloading – Cisco Linksys SPA9000 User Manual
Page 132
5-8
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 5 Configuring the LVS Auto-Attendant
Downloading Prompts
Step 5
In the text editor, replace “dir” with “nt” (see the new text in boldface). Then add this line of code:
This is the resulting AA script 2 code:
Step 6
Copy the AA script 2 code from the Notepad, and paste it into the AA script 2 field.
Step 7
For the DayTime field, enter the daytime hours for the daytime Auto-Attendant in 24-hour format. The
start and end times should be in this format:
start=hh:mm:ss;end=hh:mm:ss
(hh for hours, mm for minutes, and ss for seconds)
For example, start=9:0:0;end=17:0:0 means the start time is 9 AM and the end time is 5 PM. The other
hours (5 PM to 9 AM) are considered nighttime hours.
Step 8
For the NightTime AA setting, select yes.
Step 9
For the NightTime AA Script setting, select 2.
Click the Submit All Changes button to save your new settings.
Downloading Prompts
To erase or download customized prompt files for the Auto-Attendant, use the
The parameters in this section instruct the SPA9000 to download prompt files from a
TFTP/HTTP/HTTPS server. These files must be encoded in G.711u, size less than 60 seconds, with the
header removed.
The total prompt file size cannot be larger than 94.5 seconds. The prompt is downloaded at the device
boot up time. If the prompt has already been downloaded from the given URL, the download is not
performed. If the prompt file name is none, the corresponding prompt currently saved in the flash is
erased. The default value is blank.
The following is the format of the prompt file: