Cabletron Systems HSIM-F6 - Manual (Page 73)

FPIM-05 and FPIM-07
HSIM-F6 User’s Guide A-3
A.3 FPIM-05 AND FPIM-07
The FPIM-05 and FPIM-07, shown in Figure A-4 , provide a singlemode
fiber connection. The FPIM-05 uses a MIC style connector and the
FPIM-07 uses an SC type connector. The specifications for both devices
are listed in
Table A-2 .
The link distance is up to 40 kilometers (maximum) and 25 kilometers
(typical) on single mode fiber-optic cable as specified by ANSI
SMF-PMD.
Figure A-4 The FPIM-05 and FPIM-07
Table A-2 FPIM-05 and FPIM-07 Specifications
Parameter Typical Value Minimum Maximum
Transmitter Peak Wave
Length
1300 nm 1270 nm 1330 nm
Spectral Width 60 nm - 100 nm
Rise Time 3.0 ns 2.7 ns 5.0 ns
Fall Time 2.5 ns 2.2 ns 5.0 ns
Duty Cycle 50.1% 49.6% 50.7%
Bit Error Rate Better than 10 10