10 the fddi/ethernet translation 3.10 configurat – Cabletron Systems HSIM-F6 User Manual
Page 51
The FDDI/Ethernet Translation Configuration Screen
HSIM-F6 User’s Guide
3-27
3.10
THE FDDI/ETHERNET TRANSLATION
CONFIGURATION SCREEN
To access the FDDI/Ethernet Translation Configuration screen from the
HSIM-F6 Setup screen, use the arrow keys to highlight the
FDDI/Ethernet Translation Configuration menu item on the HSIM-F6
Setup screen and press ENTER. The FDDI/Ethernet Translation
Configuration screen,
Figure 3-15
The FDDI/Ethernet Translation Configuration Screen
Device Name: 6E132-25
Flash Image Revision: XX.XX.XX
Slot Number: X
BOOTPROM Revision: XX.XX.XX
FDDI/Ethernet Translation Configuration
SAVE
DEFAULT
EXIT RETURN
22701
Translate all non-Novell FDDI SNAP Frames to
[Ethernet II]
Translate all Ethernet Raw Frames to
[FDDI MAC]
Translate all Novell FDDI SNAP Frames to
[Ethernet II]
Translate all Novell FDDI 802.2 Frames to
[Ethernet 802.2]
Translate all Novell FDDI MAC Frames to
[Ethernet 802.2]
Interpret 802.3 length for frames > 64 bytes
[DISABLED]