Cabletron Systems HSIM-F6 - Manual (Page 47)

The Full Duplex Configuration Screen
HSIM-F6 User’s Guide 3-23
3.9 THE FULL DUPLEX CONFIGURATION SCREEN
To access the Full Duplex Configuration screen from the HSIM-F6 Setup
screen, use the arrow keys to highlight the Full Duplex Configuration
menu item and press ENTER. The Full Duplex Configuration screen,
Figure 3-14 , displays.
Figure 3-14 The FDDI Full Duplex Configuration Screen
NOTE
To configure the HSIM-F6 to operate in full duplex mode, two
FPIMs MUST be installed in the HSIM-F6.
Device Name: 6E132-25 Flash Image Revision: XX.XX.XX
Slot Number: X
BOOTPROM Revision: XX.XX.XX
FDDI Full Duplex Configuration
Operation Mode Link Status Port Status
FDDI PORT A Standard FDDI Link Enabled
FDDI PORT B Standard FDDI Link Enabled
EXIT RETURN
SET OPERATION MODE: [STANDARD FDDI]
SAVE
DESIRED OPERATION MODE: [STANDARD FDDI]