Cabletron Systems HSIM-F6 - Manual (Page 40)

Chapter 3: Local Management
3-16 HSIM-F6 User’s Guide
3.7 THE RING MAP CONFIGURATION SCREEN
The Ring Map Configuration screen displays FDDI formatted addresses
of ring stations in a graphic illustration of the FDDI ring topology, and
provides access to a Node Information screen for each device located on
the ring.
To access the Ring Map Configuration screen from the HSIM-F6 Setup
screen, perform the following steps:
1. Use the arrow keys to highlight the Ring Map Configuration menu
item on the HSIM-F6 Setup screen.
2. Press ENTER. The Ring Map Configuration screen, Figure 3-11 ,
displays.
Figure 3-11 The Ring Map Configuration Screen
NOTE
Under some conditions the display must remain on the screen
for at least 30 seconds to accurately reflect ring configuration.
A neighbor time-out can take as long as 228 seconds to update
on the ring map.
Device Name: 6E132-25 Flash Image Revision: XX.XX.XX
Slot Number: X BOOTPROM Revision: XX.XX.XX
Ring Map Configuration
SCROLL DOWN 1 SCROLL UP 1 EXIT RETURN
209141
FDDI Address: 00:00: B8: 08: F9: C4 MAC Count: 3
Current Ring Map: Primary Address Mode: [MAC]
00: 00: B8: 08: F9: C4 (DAS) <<<<<<<<<<<<<<<<<<<< (DAS) 00: 00: B8: 08: DB: 11
00: 00: B8: 08: F9: FA (DAC) >>>>>>>>>>>>>>>>>>>>