Cabletron Systems HSIM-F6 - Manual (Page 22)

Chapter 2: Installation
2-6 HSIM-F6 User’s Guide
9. Press down firmly on the back of the HSIM until the pins slide all the
way into the HSIM Connector.
10. Secure the HSIM-F6 to the module faceplate using the mounting
screws saved in
step 5 .
11. Secure the HSIM-F6 to the module standoffs using the standoff screws
saved in
step 6 .
12. Reinstall the module in the chassis.
13. Reattach the network cabling to the module.
Refer to Chapter 3 for instructions on configuring the HSIM-F6 using
Local Management.
NOTE
Ensure that the standoffs on the interface module align with the
standoff screw holes on the HSIM.