Uick, Pecs, Options – Compaq GS140 User Manual

Page 6: Compaq alphaserver gs140

UICK

PECS

Options

DA-10051-00A-008 — 02.28.2000

Compaq AlphaServer GS140

Step 6

−−−−

Storage Adapters/Controllers

−−−−

Optional (continued)

Note: For installed systems that include KFTIA I/O modules, the KFTIA includes one single-ended port and three

fast wide differential ports for a total of four SCSI buses per module.

Maximum # Supported

Tru64 UNIX

OpenVMS

PCI/System PCI/System

PCI Fibre Channel adapter (KGPSA-BC) (uses one PCI slot); Tru64

V4.0F and OpenVMS V7.2-1 support eight per system; requires Fibre

Channel cable; (SN-PBXNP-AC not currently supported in same

system under OpenVMS)

8/8

380574-001

Fibre Channel cable (BNGBX-xx) xx=02, 05, 15, 30, 50 meters

x=1, 2, 3, 4, 5

234457-B2x

PCI 1-port UltraSCSI single-ended adapter (uses one PCI slot)

8/64

8/26

KZPBA-CA

PCI 1-port UltraSCSI differential host adapter (uses one PCI slot)

8/64

8/26

KZPBA-CB

1-m VHDCI male-to-68 pin HD male UltraSCSI cable, connects KZPBA-

Cx to BA670 in system cabinet (rear)

BN38C-01

2-m VHDCI male-to-68 pin HD male UltraSCSI cable, connects KZPBA-

Cx to BA670 in system cabinet (front)

BN38C-02

3-m VHDCI male-to-68 pin HD male UltraSCSI cable, connects KZPBA to

I/O expansion cabinet

BN38C-03

5-m VHDCI male-to-68 pin HD male UltraSCSI cable, connects KZPBA to

I/O expansion cabinet

BN38C-05

PCI 1-port RAID (FWSE) controller (UltraSCSI-ready) with 4-MB cache

memory (uses one PCI slot); allows RAID levels 0, 0+1, 1, 5; includes

RAID Array 230/plus subsystem software and documentation kit; EISA

bridge option with floppy diskette drive required to run RCU; tape and

optical drives not supported; four per PCI, maximum of four per system

4/4

KZPAC-AA

PCI 3-port RAID (FWSE) controller (UltraSCSI-ready) with 4-MB cache

memory (uses two PCI slots); allows RAID levels 0, 0+1, 1, 5; includes

RAID/Array 230/plus subsystem software and documentation kit; EISA

bridge option with floppy diskette drive required to run RCU; tape and

optical drives not supported; four per PCI, maximum of four per

system, requires BN31K-0E or KZPAC-SB for third-port connection

4/4

KZPAC-CA

PCI 3-port RAID (FWSE) controller (UltraSCSI-ready) with 8-MB cache

memory (uses two PCI slots); allows RAID levels 0, 0+1, 1, 5; includes

RAID/Array 230/plus subsystem software and documentation kit; EISA

bridge option with floppy diskette drive required to run RCU; tape and

optical drives not supported; four per PCI, maximum four per system,

requires BN31K-0E or KZPAC-SB for third-port connection

4/4

KZPAC-CB

SCSI cable/bulkhead assembly kit with two ports for KZPAC-CA/CB,

allows connection of two third port outputs using one PCI bulkhead

slot.

KZPAC-SB

SCSI cable/bulkhead assembly kit with one port for KZPAC-CA/CB,

allows connection of one third port output using one PCI bulkhead slot

BN31K-0E

1-m VHDCI male-to-VHDCI male UltraSCSI cable, connects KZPAC to

front-mounted StorageWorks shelf.

BN37A-01

2-m VHDCI male-to-VHDCI male UltraSCSI cable, connects KZPAC to

rear-mounted StorageWorks shelf.

BN37A-02

Battery backup for cache memory option for KZPAC controller,

recommended for all KZPAC controllers

KZPSC-UB

8-MB cache memory option; upgrades KZPAC-CA to KZPAC-CB, field

installable only

MS100-BB