Online deployment – Acronis Snap Deploy 5 - User Guide User Manual

Page 89

settings is supported (p. 15). You always can specify general settings such as the disk to perform the
deployment to.

These settings can be overridden by individual settings (p. 131) for a machine.

Online deployment

This setting determines how to deploy the master image to the target machines that have the Online
(p. 130) state in the Machines view.

Reboot into

Specify into what bootable media the target machines will reboot to connect to the deployment
server and become ready for deployment.
The preset is: Acronis media
Acronis media

Select this option if you deploy the master image to BIOS-based or 64-bit UEFI-based
machines.

WinPE-based media

Select this option if you deploy the master image to 32-bit UEFI-based machines or to the
machines with hardware that is not properly recognized by the Acronis media (which is
based on a Linux kernel).
Select Use the media from the master image if you specified the media in the WinPE-based
media (p. 78) setting when creating the master image. Otherwise, specify a local or a
network path to the media that was created by using Acronis Snap Deploy 5 PE Builder.

Install agent