Acronis Migrate Easy 7.0 - User Guide - Manual (Page 36)

Appendix A Hard disks and BIOS setup
36 Copyright © Acronis, Inc., 2000–2007
AwardBIOS Setup Utility
Main Advanced Power Boot Exit
1. Removable Device [Legacy Floppy] Boot Sequence:
2. ATAPI CD-ROM [None]
3. IDE Hard Drive [IBM-DTLA-307020] to select the de-
4. Other Boot Drive [Disabled] vice To select the boot se-
quence, use up or down Ar-
Plug & Play O/S [No] row.
Boot Virus Detection [Enabled]
Quick Power On Self Test [Enabled] Press <+> to move the
Boot up Floppy Seek [Enabled] Device up the list, or
Full Screen Logo [Enabled] <-> to move it down
the list
F1 Help ↓ Select Item -/+ Change Values F5 Setup Defaults
Esc Exit ←→ Select Menu Enter Select Sub-Menu F10 Save and Exit
After setting the specified parameters, use the Left or Right keys to select the
Exit menu item. Reply positively to the prompt on saving the specified
parameters.
For AwardBIOS for motherboards for Pentium, Pentium Pro processors (i.e the ones
older than those described above) and AMD-K5/K6, the standard CMOS setup
screen looks like this:
ROM PCI/ISA BIOS (2A69JA2A)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
Date (mm:dd:yy) : Fri, May 15 1998
Time (hh:mm:ss) : 11: 33: 53
HARD DISKS : TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Primary Master : Auto 0 0 0 0 0 0 Auto
Primary Slave : Auto 0 0 0 0 0 0 Auto
Secondary Master : None 0 0 0 0 0 0 0
Secondary Slave : None 0 0 0 0 0 0 0
Drive A : 1.44 M
Drive B : None Base Memory: 0K
Extended Memory: 0K
Video : EGA/VG Other Memory: 512K
Halt On: All Errors Total Memory: 512K
ESC : Quit ↓→←: Select Item PU/PD/+/- : Modify
F1 : Help (Shift) F2 Change Color
The Type parameter can have Auto, Not Installed or User Defined values. In the
latter case, you have to specify the values of other parameters manually (except
MODE) according to the information on the case of the hard disk.