Acronis Migrate Easy 7.0 - User Guide User Manual

Page 22

Transferring the system to a new disk

Along with the hard disk number, you will see partition number, volume label (e.g.
SYSTEM), file system (e.g. FAT16 or FAT32) and partition size in megabytes (Mb).
Different partition types, including primary, logical and unallocated space are
marked with different colors.

To resize either partition, check the Proceed Relayout box. If you are satisfied
with the partition layout shown, uncheck this box (if checked). Clicking Next, you
will proceed to the cloning script window.

Be careful! Clicking Back in this window will reset all size and location changes that you've

selected, so you will have to specify them again.

First, select a partition to resize. It will be underlined in red.
Resize and relocate it on the next step.
You can do this by both entering values to Unallocated space before, Partition
size, Unallocated space after fields, by dragging partition borders or the
partition itself.
If the cursor turns to two vertical lines with left and right arrows, it is pointed at the
partition border and you can drag it to enlarge or reduce the partition’s size. If the
cursor turns to four arrows, it is pointed at the partition, so you can move it to the
left or right (if there's unallocated space near it).
Having provided the new location and size, click Next. You will be taken two steps
back to the partition layout. You might have to perform some more resizing and
relocation before you get the layout you need.