Canon REALiS X700 - Manual (Page 48)

48
PROJ
ECTIN
G
AN IMAGE
FROM TH
E COMPUT
ER
„ Selecting ANALOG PC-2
1
Press the [INPUT] button.
The [INPUT] window appears.
2
Select the second top item in the menu with the [INPUT] button.
The selection is toggled through available input signals from above.
3
If the ANALOG PC-2 is unavailable from the list at the left, press [>], and then press [ ]
/ [ ] to select the ANALOG PC-2 from the list at the right.
4
Press the [OK] button.
z Select [ANALOG PC-2] for Input Terminal-2.
z You can select any input signal type from all options through the [ ] / [ ] button.
<
<
<
<