Canon REALiS X700 - Manual (Page 114)

114
SE
TTING
UP FU
NCTIO
N
S FROM MEN
U
S
Resetting the Lamp Counter
[Lamp counter]
You can reset the lamp counter that indicates the
timing to replace the projector when you replace
it.
T
T
T
z If the time of use is 1,400 hours
1,800 hours for SX7/X700
2,300 hours for SX60
z If the time of use is 1,400 to 1,500 hours
1,800 to 2,000 hours for SX7/X700
2,400 to 2,500 hours for SX60
z If the time of use is 1,500 hours or longer
2,000 hours or longer for SX7/X700
2,500 hours or longer for SX60
z If you replace the lamp
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Other settings
Lamp counter
z Do not reset the lamp counter except
when you have replaced the lamp.
Otherwise, the lamp counter cannot
indicate the correct timing for replac-
ing the lamp.
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
Resets the lamp counter.
Cancels resetting the lamp counter.
z See P118 for more detailed informa-
tion on replacing the lamp.
OK
Cancel