Canon REALiS X700 - Manual (Page 110)

110
SE
TTING
UP FU
NCTIO
N
S FROM MEN
U
S
Prohibiting the Projector Operation
[Key lock]
You can prohibit the use of the buttons on the
top control or remote control to prevent them
from being pressed by mistake.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Guide Message
[Guide]
You can enable/disable the guide message
showing how to use the projector.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Key lock
Disables the key lock function.
Prohibits the use of the top control.
Prohibits the use of the remote con-
trol.
z The key lock function becomes effec-
tive from the moment when the [OK]
button is pressed after selecting [Main
unit] or [Remote control]. Be sure to
press the [OK] button on the top con-
trol or remote control which is not
locked.
z To unlock the key lock function forc-
ibly, remove the power plug from the
AC outlet after the projection, and
then insert the power plug while hold-
ing down the [OK] button until the pro-
jector beeps.
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
Off
Main unit
Remote control
System settings
Guide
Disables the guide message.
Enables the guide message.
z The guide message appears on the
screen when:
- The projector is turned on (P38).
- The projector is turned off (the
[POWER] button is pressed) (P58).
- No input signal is confirmed (P34,
62).
- The invalid button is pressed under
NO SHOW, FREEZE, or D.ZOOM
(P76, 77, 79).
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
Off
On