Canon REALiS X700 - Manual (Page 36)

36
PROJ
ECTIN
G
AN IMAGE
FROM TH
E COMPUT
ER
Connecting to an External Monitor
You can display an image from the projec-
tor to an external monitor.
Connecting to AUDIO IN Termi-
nals (SX7/X700)
Connect an audio cable to the AUDIO IN ter-
minal corresponding to the input image sig-
nal if you want to use the projector's speaker.
z You can connect one external monitor.
The multi-monitor display is not sup-
ported.
z The projected image is displayed on
the external monitor.
z You cannot output the input signal to
the external monitor if it is DIGITAL
PC.
VGA cable
To monitor output terminal
(mini D-sub 15-pin terminal)
Image input terminal
(mini D-sub 15-pin terminal)
Commercial VGA cable
External monitor
Projector
z The speaker outputs the audio signal
corresponding to the selected image
signal.
z Use an audio cable without a built-in
resistor. Using an audio cable with a
built-in resistor turns down the sound.
z Connect the audio cable between the
AUDIO OUT terminal and an external
audio-visual equipment if you want to
output the audio signal to the audio-
visual equipment (P66).
z The built-in speaker is monaural.
Audio cable
AUDIO OUT terminal
AUDIO IN terminal
Commercial Audio cable
Computer
Projector
SX7/X700
You can input an audio signal
corresponding to 3 image
input systems.
Connect to the AUDIO IN ter-
minal corresponding to the
type of the input image signal.
for DEGITAL IN/ANALOG IN-1
for ANALOG IN-2