Canon EOS 1D - Manual (Page 28)

28
1
Connect the charger to a power
outlet.
Connect the power plug to a power
outlet, and connect the power cord to
the charger.
When no battery is attached, all the
indicator lamps will be off.
2
Remove the protective covers
from the charger and battery.
Remove the protective cover on the
charger by sliding it out.
3
Recharge the battery.
Slide the battery into the charger’s
slot as shown by the arrow, and make
sure it is securely attached.
You can attach the battery to slot A or B.
X The battery will start recharging and
the green status lamp will blink.
X When the battery is fully charged, all
three Charge level indicators will light
(50%/80%/100%).
It takes approx. 2 hours to fully recharge
a completely exhausted battery.
The time required to recharge the battery
depends on the ambient temperature
and battery’s charge level.
Charging the Battery
COP
Y