Canon EOS 1D - Manual (Page 167)

167
You can edit out the first and last scenes of a movie in 1-sec. increments.
1
On the movie playback screen,
select [X].
X The editing screen will be displayed.
2
Specify the parts to be edited out.
Select either [ ] (Cut beginning) or
[ ] (Cut end), then press <0>.
Tilt <9> to the left or right to see the
previous or next frames. Holding it down
will fast forward the frames. Turn the
<5> dial to browse frame-by-frame.
After deciding which part to edit out, press
<0>. The portion highlighted in blue on
the top of the screen is what will remain.
3
Check the editing.
Select [7] and press <0> to playback
the portion highlighted in blue.
To change the editing, go back to step 2.
To cancel the editing, select [ ] and
press <0>.
4
Save the movie.
Select [ ], then press <0>.
X The save screen will appear.
To save it as a new movie, select
[New file]. Or to save it and overwrite
the original movie file, select
[Overwrite]. Then press <0>.
X Editing the Movie’s First and Last Scenes
Since the editing is done in 1-sec. increments (position indicated by [X]), the exact
position where the movie is edited may differ slightly from the position you specified.
If the card does not have enough room, [New file] will not be selectable.
More movie editing functions are available with ZoomBrowser EX/
ImageBrowser (provided software).
COP
Y