Canon EOS 1D - Manual (Page 209)

209
3 Custom Function Settings
C.Fn I -4 Bracketing auto cancel
0: On
The AEB and WB-BKT settings will be canceled if you set the power
switch to <2> or clear the camera settings. AEB will also be
canceled when bulb exposure is set or the flash is ready to fire.
1: Off
The AEB and WB-BKT settings will be retained even when the power
switch is set to <2>. (When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained in memory.)
C.Fn I -5 Bracketing sequence
The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, -, +
1: -, 0, +
2: +, 0, -
C.Fn I -6 Number of bracketed shots
The number of shots taken with AEB and white balance bracketing can be
changed from the usual 3 shots to 2, 5, or 7 shots. When C.Fn I -5-0 is set,
the bracketed shots will be taken as shown in the table below.
0: 3 shots
2: 5 shots
1: 2 shots 3: 7 shots
AEB
WB Bracketing
B/A Direction M/G Direction
0 : Standard exposure 0 : Standard white balance 0 : Standard white balance
- : Decreased exposure - : Blue bias - : Magenta bias
+ : Increased exposure + : Amber bias + : Green bias
(1-stop increments)
1st shot 2nd shot 3rd shot 4th shot 5th shot 6th shot 7th shot
0: 3 shots Standard (0) -1 +1
1: 2 shots Standard (0) -1
2: 5 shots Standard (0) -2 -1 +1 +2
3: 7 shots Standard (0) -3 -2 -1 +1 +2 +3
COP
Y