Canon EOS 1D - Manual (Page 128)

128
z Live View Shooting
Each time you press the button, the information display will change.
B About the Information Display
AF point (d)
ISO speed
Shots remaining
Exposure level indicator
Upper indicator: Exposure level/AEB range
Lower indicator: Flash exposure level/FEB range
Aperture
Shutter speed
Picture Style
Battery check
g : Exposure
simulation
E : Standard
brightness
Drive mode
White balance
AF mode
•d : Live mode
•c : Face detection Live mode
•f: Quick mode
Image size
AE lock
Flash-ready
Auto Lighting
Optimizer
•
: Standard
• : Low
• : Strong
• : Disable
Highlight tone priority
AEB
FEB
Flash exposure compensation
Histogram
The histogram can be displayed when [Expo. simulation: Enable]
(p.130) has been set.
By setting [8C.Fn IV -15: Add aspect ratio information] to setting 1 to
6, you can shoot with the same framing as with a medium- or large-
format film camera such as 6x6cm, 6x4.5cm, and 4x5 inch. Vertical lines
matching the set aspect ratio will be displayed (p.234).
When is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low or bright light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low- or bright-light conditions.
COP
Y