Canon EOS 1D - Manual (Page 195)

195
wPrinting
5
Set the date and file number
imprinting.
Set as necessary.
Turn the <5> dial to select <
I
>,
then press <0>.
Turn the <5> dial to select the
desired setting, then press <0>.
6
Set the number of copies.
Set as necessary.
Turn the <5> dial to select <
R
>,
then press <0>.
Turn the <5> dial to select the
number of copies, then press <0>.
7
Start printing.
Turn the <5> dial to select [Print],
then press <0>.
X The printing will start.
For details on trimming, see page 197.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
When imprinting the shooting information c (p.193) for images shot at
H2, H3 ISO speeds during ISO speed range expansion, the ISO speed
setting may not be correctly printed.
Depending on the image’s file size and image size, it may take some
time for the printing to start after you select [Print].
If image tilt correction (p.197) has been applied, it may take longer to
print the image.
To stop the printing, press <0> while [Stop] is displayed, then select [OK].
If you execute the [7 Clear all camera settings] menu option (p.53), all
the settings will revert to the default.
COP
Y