ITC Avoximeter 4000 Whole Blood CO-Oximeter - Manual (Page 42)

ITC AVOXimeter 4000 Operator’s Manual
layed: 4. The screen for specifying the sample type is disp
5. Press followed by .
6. If optional entry of Patient IDs is enabled (see page 26), the screen for entering a
Patient ID is displayed:
Note: To bypass entry of a Patient ID, press .
● If the Patient ID that was previously entered during the current session is to
be used, press followed by . A confirmation screen is displayed.
followed by ● If a new Patient ID is to be entered, press . The
screen for entering a Patient ID is displayed:
Enter the Patient ID, then press . When the confirmation screen is
, press followed by displayed .
ten seconds: 7. Test results are displayed within
Note:
The oxygen content (O
2
Ct) of the sample is calculated and included in
the test record. The (O
2
Ct) result is included in the results printout and in
the stored data record, but is not displayed.
8. Holding the cuvette by the finger grip on the black cap, remove the cuvette from
the test chamber.
34