ITC Avoximeter 4000 Whole Blood CO-Oximeter - Manual (Page 17)

ITC AVOXimeter 4000 Operator’s Manual
HAZARD WARNING: Any items exposed to human blood, plasma or serum
must be handled cautiou a biohaz aterial ce w
laboratory safety practice federal a regulat ral, sta
local laws and regulations require that hazardous waste be disposed of in a
specific manner. Waste material from the ITC AVOXimeter 4000 which may be
class
azard lude used es. It is im t that step
taken to di se materials in accordance with the prevailing regulations
in your location.
Connections
Connections to the power supply and an optional printer (or a comp e at the rear of
BIO
sly as
s and
ardous m
nd local
in accordan
ions. Fede
ith
te and
ified as bioh
spose of the
ous inc cuvett portan s be
uter) are mad
the instrument (Figure 4).
Use only the power supply provided with the instrument.
Serial Number
Label
Carrying
AC Adapter
Connector
Printer or Computer Temperature Sensor
Figure 4. Rear Panel Components
Handle
Auto
The ITC A
for a specified period of time (the standby delay). The instrument is factory preset for a standby
delay time of 60 minutes, but a time of 10 to 180 minutes can be specified (see page 18). To
resume normal operation when the instrument is in standby, press and hold down any key for one
second.
Note: The ITC AVOXimeter 4000 also enters standby if the battery charge becomes
critically low.
The ITC AVOXimeter 4000 shuts down after it has been in standby for 4 hours.
Instrument Lockouts
The instrument can be configured to allow use only by authorized operators and/or to allow use
only if optical QC has been performed.
Connector Connector
matic Standby and Shutdown
VOXimeter 4000 enters a low-power standby mode after the instrument has been idle
9