ITC Avoximeter 4000 Whole Blood CO-Oximeter - Manual (Page 27)

ITC AVOXimeter 4000 Operator’s Manual
Specify
A User ID and/or Patient ID can be entered for any test. The User ID and/or Patient ID is included
in the results record for tests that are run and can be included in the printed results. Three
alternatives are available for entry of User ID:
● Authorized User ID with Security:
ing Entry of User ID and/or Patient ID
Entry of an authorized User ID from a list of authorized
users is required in order to start the instrument and is not again prompted for until the
instrument is restarted. The User ID that is entered to operate the instrument is included
on all test records and can also be included on printed test results if specified.
● Authorized User ID without Security: Entry of a numeric User ID is prompted for
whenever a test is run. The operator can enter any numeric User ID (up to nine digits,
with no leading zeros) or the operator can bypass entering a User ID for that test. If a
User ID is entered, that User ID is included on the test record and can be printed with test
results.
● Authorized User ID Disabled: A User ID cannot be entered.
A prompt can also be enabled for optional entry of a Patient ID whenever a test is run.
Specifying Mandatory Entry of an Authorized User ID
Enabling the Requirement to Enter an Authorized User ID:
1. Display the “Data Management” menu (a submenu of , see page 7).
2. Press followed by to display the current User ID setting:
followed by 3. Press . A confirmation prompt is displayed, and the
“Security” menu is displayed:
followed by 4. Press . A confirmation prompt is displayed, and the
“Authorized User ID” menu is displayed:
Note: The authorized User ID must be re-entered if the instrument is idle for
longer than 15 minutes or is turned off.
5. If needed, review the list of authorized users, add or delete authorized users, print
the authorized user list, and/or specify whether authorized User IDs are included
in the results printout (see below).
19