General warnings, Manufacturer’s rights and responsibilities – Humboldt HM-3000.3F Digital MasterLoader User Manual

Page 5

• Plug and play Serial port (RS232) communications with Humboldt

Material Testing Software (HMTS) for controlling and downloading
stored data.

• Unique ID and RS485 communication port for multiple unit

connections with a single computer.

In addition, the loader offers a large, backlit LCD display, a touch-sensitive
keypad, a battery-backed real time clock, and auto-conversion of calibration
and speed parameters between English and SI units.

General Warnings

Safety Warnings
Operators should take care to operate this machine under the maximum
load restrictions. The machine is programmed at the factory to provide
safety shutdown if the upper or lower maximum travel is exceeded as well
as if the upper instrument calibration is exceeded.

Electrical Warnings
Typically, there is no reason for the operator to open the machine. However,
if the customer’s engineers attempt to change settings to the circuit board
connected to the back panel, the machine must always be unplugged before
this operation. Unplugging the internal connection to
the back panel circuit board while the machine is under power will result
in permanent damage to the circuit board.

Manufacturer’s Rights and Responsibilities

Software Copyright

This manual or parts thereof, may not be

reproduced in any form without the expressed written

permission of HUMBOLDT MFG. CO.

UNPUBLISHED LICENSED PROPRIETARY WORK