Canon mp495 - Manual (Page 617)

(LED display)
Make sure the Platen Glass and
the print head alignment sheet
are not dirty.
Make sure the type and size of
loaded paper is suitable for
Automatic Print Head Alignment.
For Automatic Print Head
Alignment, always load one sheet
of A4 or letter-sized plain paper.
Make sure if Print Head nozzles
are clogged.
Print the nozzle check pattern to
check the status of the Print
Head.
Routine Maintenance
If the error is not resolved, connect
the machine to the computer and
align the Print Head on the printer
driver.
Aligning the Print Head Position
POWER Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately
When the POWER and Alarm lamps flash alternately as shown below, and the error code as
follows is displayed on the LED, an error requiring servicing might have occurred.
Error Code Action
P, 0, 2
(LED display)
Cancel printing, turn off the machine. Then
clear the jammed paper or protective material
that is preventing the FINE Cartridge Holder
from moving, and turn on the machine again.
Important
Be careful not to touch the components
inside the machine. The machine may not
print out properly if you touch it.
If the problem is not resolved, contact the
service center.
P, 1, 0 Turn off the machine, and unplug the power
cord of the machine from the power supply.
Contact the service center.
Page 617 of 759 pages An Error Code Is Displayed on the LED