Canon EOS 40D - Manual (Page 165)

165
Under the Mode Dial’s , , and positions, you can
register most of the current camera settings containing your preferred
shooting mode, menus, Custom Function settings, etc.
1
Select [Camera user setting].
Under the [7] tab, select [Camera
user setting], then press <0>.
2
Select [Register].
3
Register the camera user setting.
Turn the <5> dial to select the Mode
Dial position where the camera settings
will be registered, then press <0>.
When the confirmation dialog appears,
select [OK] and press <0>.
X The current camera settings will be
registered under the Mode Dial’s C*
position.
In step 2, if you select [Clear settings], the respective Mode Dial
position will revert to default setting effective before you registered the
camera settings. The procedure is the same as step 3.
3 Register Camera User SettingsN
About [Clear settings]
The My Menu settings will not be registered.
When the Mode Dial is set to , , or position, the [7
Clear all camera settings] and [8 Clear all Custom Func. (C.Fn)]
menus will not work.
Even when the Mode Dial is set to , , or position, you
can still change the drive mode and menu settings. If you want to register
those changes, follow the procedure above.
When you press the button, the registered settings will appear on
the LCD monitor. (p.168)