Canon EOS 40D - Manual (Page 139)

139
wPrinting
5
Set the date and file number
imprinting.
Set as necessary.
Turn the <5> dial to select <
I
>,
then press <0>.
Turn the <5> dial to select the
desired setting, then press <0>.
6
Set the number of copies.
Set as necessary.
Turn the <5> dial to select <
R
>,
then press <0>.
Turn the <5> dial to select the
number of copies, then press <0>.
7
Start printing.
Turn the <5> dial to select [Print],
then press <0>.
X The button’s blue lamp will
blink and the printing will start.
To print another image with the same settings, select the image and just
press the button lit in blue. Trimming will not be applied to 1-copy
printing.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
If you did “Adjusting the rotation angle” (p.141), the printing time may
take longer.
To stop the printing, press <0> while [Stop] is displayed, then select
[OK].