Canon EOS 40D - Manual (Page 135)

135
Preparing to Print
6
Playback the image.
Press the button.
X The image will appear, and the
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
X The button lamp will light in
blue.
w
PictBridge
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
When connecting the camera to the printer, do not use any cable other
than the interface cable provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. To find out what’s wrong, do the following:
Press the button to playback the image and follow the steps
below.
1. Press <0>.
2. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor. (p.142)
You can also print RAW and sRAW images taken by this camera.
If you use a battery to power the camera, make sure it is fully charged.
With a fully charged battery, printing up to about 7 hours is possible.
Before disconnecting the cable, turn off the camera and printer first. Pull
out the cable while holding the plug, not the cord.
For direct printing, using AC Adapter Kit ACK-E2 (sold separately) to
power the camera is recommended.