Canon EOS 40D - Manual (Page 142)

142
wPrinting
Depending on the printer, the trimmed image area might not be printed
as you specified.
The smaller you make the trimming frame, the grainier the picture will
look on the print. If the picture will be too grainy, the trimming frame will
turn red.
While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details, see the printer’s instruction manual.
Error Messages
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Press <0> to stop printing. After resolving the
problem, resume printing. For details on how to resolve a printing problem,
refer to the printer’s instruction manual.
Paper error:
Check whether the paper is properly loaded in the printer.
Ink error:
Check the printer’s ink level, and check the waste ink tank.
Hardware error:
Check for any printer problems other than paper and ink problems.
File error:
The selected image cannot be printed via PictBridge. Images taken with a
different camera or images edited with a computer might not be printable.