HP laserjet m1212nf - Manual (Page 231)

Problem Cause Solution
The product does not pull media from
the input tray. The product might be in manual-feed
mode. At the computer, follow the onscreen
instructions to deactivate manual-feed
mode. Or, at the product, open and
close the print-cartridge door.
The pickup roller might be dirty or
damaged. Contact HP Customer Care. See
www.hp.com/support/ljm1130series or
www.hp.com/support/ljm1210series or
the support flyer that came in the box.
The paper-length adjustment control in
the input tray is set at a length that is
greater than the media size. Set the paper-length adjustment control
to the correct length.
ENWW Solve paper-handling problems 217