HP laserjet m1212nf - Manual (Page 105)

Change the copy quality setting (M1210 Series)
1. Press the Copy Settings button two times to
open the Copy Quality menu.
2. Use the arrow buttons to select a copy-quality
option, and press the OK button.
NOTE: The setting returns to the default
value after two minutes.
Check the scanner glass for dirt and smudges
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can
affect performance. Use the following procedure to clean the scanner glass and white plastic backing.
1. Use the power switch to turn off the product,
and then unplug the power cord from the
electrical socket.
2. Open the scanner lid.
ENWW Copy settings 91