Set light/dark and resolution, Set the default light/dark (contrast) setting – HP laserjet m1212nf User Manual
Page 132
Set the redial-on-no-answer option
If this option is turned on, the product redials automatically if the receiving machine does not answer.
The factory-set default for the redial-on-no-answer option is Off.
1.
On the control panel, press the Setup button.
2.
Use the arrow buttons to select the Fax setup menu, and then press the
OK
button.
3.
Use the arrow buttons to select the Fax Send setup menu, and then press the
OK
button.
4.
Use the arrow buttons to select the Redial-no answer menu, and then press the
OK
button.
5.
Use the arrow buttons to select the On or Off option, and then press the
OK
button.
Set the redial-on-communication-error option
If this option is turned on, the product redials automatically if some sort of communication error occurs.
The factory-set default for the redial-on-communication-error option is On.
1.
On the control panel, press the Setup button.
2.
Use the arrow buttons to select the Fax setup menu, and then press the
OK
button.
3.
Use the arrow buttons to select the Fax Send setup menu, and then press the
OK
button.
4.
Use the arrow buttons to select the Redial Comm. Error menu, and then press the
OK
button.
5.
Use the arrow buttons to select the On or Off option, and then press the
OK
button.
Set light/dark and resolution
Set the default light/dark (contrast) setting
The contrast affects the lightness and darkness of an outgoing fax as it is being sent.
The default light/dark setting is the contrast that is normally applied to items that are being faxed. The
slider is set to the middle as the default setting.
1.
On the control panel, press the Setup button.
2.
Use the arrow buttons to select the Fax setup menu, and then press the
OK
button.
3.
Use the arrow buttons to select the Fax Send setup menu, and then press the
OK
button.
4.
Use the arrow buttons to select the Def. light/dark menu, and then press the
OK
button.
5.
Use the left arrow button to move the slider to the left to make the fax lighter than the original,
or use the right arrow button to move the slider to the right to make the fax darker than the
original.
6.
Press the
OK
button to save the selection.
118
Chapter 10 Fax (M1210 Series only)
ENWW