Dell Inspiron 530 - Manual (Page 51)

Setting Up and Using Your Computer
51
Creating a RAID 1 Volume
NOTE:
When you perform this operation, all data on the RAID drives will be lost.
1 Set your computer to RAID-enabled mode (see "Setting Your Computer to
RAID-Enabled Mode" on page 49).
2 Click Start and point to All Programs → Intel
®
Matrix Storage
Manager → Intel Matrix Storage Console to launch the Intel ®
Matrix
Storage Manager.
NOTE:
If you do not see an Actions menu option, you have not yet set your
computer to RAID-enabled mode (see "Setting Your Computer to RAID-
Enabled Mode" on page 49).
3 On the Actions menu, select Create RAID Volume to launch the Create
RAID Volume Wizard.
4 Click Next at the first screen.
5 Confirm the volume name, select RAID 1 as the RAID level, and then
click Next to continue.
6 On the Select Volume Location screen, click the first hard drive you want
to use to create your RAID 1 volume, and then click the right arrow.
Click a second hard drive until two drives appear in the Selected window,
and then click Next.
7 In the Specify Volume Size window, select the Volume Size desired and
click Next.
8 Click Finish to create the volume, or click Back to make changes.
9 Follow Microsoft Windows procedures for creating a partition on the new
RAID volume.
book.book Page 51 Monday, October 6, 2008 11:28 AM