Dell Inspiron 530 - Manual (Page 157)

Removing and Installing Parts
157
11 Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
12 Enter system setup (see "System Setup" on page 187) and select the
appropriate Drive option.
13 Verify that your computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 90).
Installing a Second CD/DVD Drive
1 Follow the procedures in "Before You Begin" on page 105.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 107).
3 Remove the bezel (see "Removing the Bezel" on page 136).
4 Align the tip of a Phillips screwdriver with the slot on the break-away metal
plate and rotate the screwdriver outwards to break the metal plate.
5 Gently slide the drive into place.
6 Align the screw holes in the CD/DVD drive with the screw holes in the
CD/DVD drive bay.
7 Replace and tighten the two screws securing the CD/DVD drive.
8 Connect the power and data cables to the drive.
book.book Page 157 Monday, October 6, 2008 11:28 AM