Answering calls – Yealink W52P User Manual

Page 61

Call Features

To place a new call during an active call:

You can place at most two calls on your handset.

1. Press the Ext.Call soft key.

The active call is placed on hold.

2. Enter the desired number in the Call To field using the keypad.

3. Press

or to dial out.

Note

You can answer a call in three ways:



Using the earpiece



Using the speakerphone



Using the headset

Note

Answering When Not in Another Call

In all cases, the active call will appear on the LCD screen showing call duration and
destination.

To answer a call using the earpiece:

1. Press

or the Accept soft key.

To answer a call using the speakerphone mode:

1. Press

To answer a call using the headset:

1. With a headset connected, press the Accept soft key.

Answering When in Another Call

If you are during an active call, an incoming call arrives on the handset, do the
following:

1. Press , or the Accept soft key.

The incoming call is answered, and the original call is placed on hold.

You can ignore an incoming call by pressing the Silence soft key or reject an incoming
call by pressing the on-hook key.

You can also activate Do Not Disturb mode on a per-line basis to reject all incoming calls
of the specified line.

You can also make an IP call by directly dialing the IP address of any IP phone. For
example, IP: 192.168.1.15.