Yealink W52P - Manual (Page 42)

User Guide for the W52P IP DECT Phone
30
To enter a character:
You can press the key which contains your desired character a certain number of times
to enter the character.
To switch the input method:
1. Press .
The current input method is indicated on the bottom right-hand corner of the LCD
screen. For example, “ABC” represents the upper-case input method, “abc”
represents the lower-case input method and “123” represents the digital input
method.
To make a space:
1. Press when the input method is not “123”.
To move the cursor:
1. Press or to move the cursor.
To delete a wrong input character:
1. Place the cursor behind the wrong input character.
2. Press the Del soft key to delete the character.
You can add contacts to your local directory manually or from the call history. You can
also add contacts to your local directory from the remote phone book or the network
directory. For more information, refer to
Remote Phone Book on page 33 and Network
Directory on page 34 .
To add a contact to the local directory manually:
1. Press to enter the main menu.
2. Select .
3. Press the Options soft key, and select New Contact.
If there is no contact in the local directory, press the New soft key directly.
4. Enter the desired values in the Name, Number and Mobile fields.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To add a contact to the local directory from the call history:
1. Press the History soft key when the handset is idle.
2. Press or to highlight the desired call history list, and press the OK key.
3. Press or to highlight the desired entry.
4. Press the Options soft key, and select Add To Local->New Entry.
5. Press or to set the number to be the office number or the mobile number