Yealink SIP-T41P - Manual (Page 97)

Basic Call Features
87
2. Do one of the following:
- Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to
Directory on page 29 for more information).
- Press the Directory soft key, and then select History. Select the desired list and
press or to select the entry (Directory should be configured in
advance. Refer to
Directory on page 29 for more information).
- Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory should be configured in
advance. Refer to
Directory on page 29 and Remote Phone Book on page 40
for more information).
3. Press or to dial out.
4. After the party answers the call, press the Tran soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call when there is an active call on the phone. Otherwise, another
incoming call is automatically rejected by the phone with a busy message when there is
an active call on the phone. You can also enable or disable the phone to play a warning
tone when receiving another call.
To configure call waiting via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press or , or the Switch soft key to select Enable from the Call Waiting field.
3. Press or , or the Switch soft key to select Enable from the Play Tone field.
4. (Optional.) Enter the call waiting on code or off code respectively in the CW On
Code or CW Off Code field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Call waiting is configurable via web user interface at the path Features->General
Information.