Yealink SIP-T41P - Manual (Page 75)

Customizing Your Phone
65
You can enable live dialpad on the SIP-T41P IP phone, which enables the IP phone to
automatically dial out the phone number without pressing any other key. You can also
configure a delay, where the phone will dial out the phone number automatically after
the specified period of time.
To enable live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time (1~14s) field.
The default delay time is 4s.
4. Click Confirm to accept the change.
Note
You can dial a hotline number immediately upon lifting the handset, pressing the
speakerphone key or the line key. You can also configure a delay, where the phone will
dial out the hotline number automatically after the specified period of time.
To configure the hotline number via phone user interface:
1. Press Menu->Features->Hot Line.
2. Enter the desired number in the Number field.
3. Enter the delay time (in seconds) in the Hotline Delay field.
Live dialpad is configurable via web user interface only.