Yealink SIP-T41P User Manual

Page 23

Getting Started

2. Connect the included or a standard Ethernet cable between the Internet port on the

phone and the one on the wall or switch/hub device port.

Power over Ethernet

With the included or a regular Ethernet cable, the SIP-T41P IP phone can be powered
from a PoE-compliant switch or hub.

To connect the PoE:

1. Connect the Ethernet cable between the Internet port on the phone and an

available port on the in-line power switch/hub.

Note

If in-line power switch/hub is provided, you don’t need to connect the phone to the power

adapter. Make sure the switch/hub is PoE-compliant.

The phone can also share the network with another network device such as a PC
(personal computer). It is an optional connection.

Important! Do not unplug or remove power to the phone while it is updating firmware
and configurations.