Yealink SIP-T41P - Manual (Page 96)

User Guide for the SIP-T41P IP Phone
86
You can transfer a call to another party in one of the three ways:

Blind Transfer: Transfer a call directly to another party without consulting.

Semi-Attended Transfer: Transfer a call when the target phone is ringing.

Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press the Tran soft key during a call.
2. Enter the number you want to transfer the call to.
3. Press the Tran soft key to complete the transfer.
Then the call is connected to the number to which you are transferring.
To perform a semi-attended transfer:
1. Press the Tran soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
- Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to
Directory on page 29 for more information).
- Press the Directory soft key, and then select History. Select the desired list and
press or to select the entry (Directory should be configured in
advance. Refer to
Directory on page 29 for more information).
- Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory should be configured in
advance. Refer to
Directory on page 29 and Remote Phone Book on page 40
for more information).
3. Press or to dial out.
4. Press the Tran soft key to complete the transfer when receiving ringback.
To perform an attended transfer:
1. Press the Tran soft key during a call.