Yealink SIP-T41P - Manual (Page 26)

User Guide for the SIP-T41P IP Phone
16
3. Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a static IPv4 address via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin) ->Network->WAN
Port.
2. Press to select IPv4 and press the Enter soft key.
3. Press to select Static IPv4 Client and press the Enter soft key.
4. Enter the desired values in the IPv4 Address, Subnet Mask, Default Gateway,
Primary DNS and Secondary DNS fields respectively.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a static IPv6 address via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin) ->Network->WAN
Port.
2. Press to select IPv6 and press the Enter soft key.
3. Press to select Static IPv6 Client and press the Enter soft key.
4. Enter the desired values in the IP Address, Prefix, Default Gateway, Primary DNS
and Secondary DNS fields respectively.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.