Bio-Rad Econo Gradient Pump Kits - Manual (Page 28)

5.5.1 Holding a Run
Pressing the Hold key displays the following screen:
Holding ___%B
CONTINUE Abort
When holding, the pump runs indefinitely at the current programmed
conditions. Selecting Continue will continue the run. Selecting Abort
will stop the run, leaving the pump in Program mode, and indicate, by
the Step LED, which step was running at the time Abort was pressed.
5.5.2 Pausing a Run
Pausing a run stops the pump and displays the following screen:
Paused ...
Continue Abort
Selecting Continue will continue the run. Selecting Abort will stop
the run leaving the pump in Program mode and indicating, by the
Step LED, which step was running at the time. Press any key to
return to the Manual mode.
5.5.3 Aborting a Run
Aborting a run displays the following screen:
Program Aborted
The run is stopped, and the pump remains in Program mode and
indicates, by the Step LED, which step was running at the time. Press
any key to return to the Manual mode.
System Operation
24
4006161B.qxd 8/14/2003 8:09 AM Page 24