Cabletron Systems Lancast Media Converter 7000 - Manual (Page 37)

Viewing Chassis Information 2-21
The SmartSwitch 7000 Chassis View
Figure 2-9. The FDDI Statistics Window
The FDDI Statistics window contains the following Þelds:
SMT #
The index number of the SMT entity to which the statistics entries pertain.
Frames/sec
The current bandwidth, expressed in terms of frames per second.
KBytes/sec
The current bandwidth, expressed in terms of kilobytes per second.
Peak KBytes/sec
The most kilobytes per second experienced on the ring associated with the SMT
entity since peak FDDI statistics counters were last reset for the device.
You can reset the peak value at any time by clicking .
%Util (100 MBits/sec)
The current percentage of bandwidth utilized on the network in comparison to its
theoretical maximum bandwidth (100 Mbps for an FDDI network). This is
calculated by using the following formula: (current Kbps*8)/1000.
Setting the FDDI Statistics Polling Interval
To set the interval at which you want the SmartSwitch 7000 polled for FDDI
Statistics:
1. Click on next to the Peak Rate (sec): field. The New Timer Interval
window, Figure 2-10 , will appear.