Cabletron Systems Lancast Media Converter 7000 - Manual (Page 100)

ATM Configuration
6-2 Accessing the ATM Connections Window
Figure 6-1. The Current ATM Connections Window
The Current ATM Connections window provides the following information about
the deviceÕs ATM connections:
Connection Data
The Connection Data Þelds provide the following information about each ATM
interface available on the device:
I/F Displays the index number assigned to each ATM
interface installed in the 7C0x chassis. Note that
interfaces installed in a 7C0x chassis are indexed
following an XXXXYY format, where X = the slot number
in which the module containing the interface is installed,
times 10,000; and Y = the physical index assigned to the
port interface on the module. For example, an index of
40001 would refer to port 1 on the module installed in
slot 4 of the chassis.
Maximum Allowed Displays the maximum number of connections allowed
by current device Þrmware.
Current ConÞgured Displays the number of Permanent Virtual Circuits, or
PVCs, currently conÞgured.
NOTE
For some 7A06 Þrmware versions, Connection Data will not be displayed. In most cases,
the maximum number of connections is 1024; all conÞgured PVCs will be displayed in
the Settings list box.