Cabletron Systems Lancast Media Converter 7000 - Manual (Page 103)

Configuring Connections 6-5
ATM Configuration
4. In the Encapsulation Type field, click on the down arrow located to the right
of the field, and drag down to select the desired encapsulation type. Current
versions of 7A06-01 firmware use 802.3 VC-based multiplexing for bridging
protocols (designated VC MUX 802.3 Bridged); future versions will add
support for additional encapsulation methods.
5. Click Add to add the new permanent circuit to the ATM interface. The circuit is
automatically enabled, and will remain in place until it is manually removed.
Deleting a Connection
To delete an existing PVC:
1. In the connections list box, click to select the connection you wish to delete.
2. Click on Delete. A confirmation window will appear, listing the parameters
assigned to the connection and asking you to verify that you wish to delete it.
Click on OK to proceed with the deletion, or on Cancel to cancel.
TIP
Selecting any of the other encapsulation types listed in the ÞeldÕs menu will cause a ÒSet
FailedÓ error when you attempt to add the new connection.