Baseline Systems BaseStation 3200 - Manual (Page 66)

C h a p t e r 5 – R e f e r e n c e
Page 64
Baseline 3200
Flow Menu
This dial position provides the programming for
flow management and control. Please see a
previous section for this data. Refer to page 43,
Flow Management & Monitoring.
biSensor Menu
There are two sub-menu levels in this dial
position. Please see a previous section for this
data. Refer to page 38, Micro-Climates and Zone
Scheduling Groups.
biCoder Menu
This is the first step is programming the
BaseStation 3200 controller – assigning valve
biCoders to zone numbers. In order to activate a
valve, the valve biCoder that is attached to the valve solenoid must be assigned a zone number.
Then activating the valve is easily done by turning on the zone, either manually or by a program
start.