ADS Environmental Services Model 4000 530017 A0 - Manual (Page 98)

5-12 ADS Model 4000 Manual
Problem Time on the monitor clock is incorrect.
Possible
Causes
Monitor clock may be a faulty.
PC clock may read incorrect time.
Possible
Solutions
Verify the time on the PC clock and correct if necessary.
Reactivate the monitor to enable the clock.
Collect the data from the monitor and replace monitor.
Problem You receive a Device Time Out message in FieldScan.
Possible
Cause
Depth or velocity board may be faulty.
Possible
Solutions
Re-attempt communication with monitor.
Contact your regional ADS representative.
Problem Gap exists within the collected data.
Possible
Cause
Monitor time may be incorrect.
Monitor basic code or variable file may be corrupt.
Possible
Solutions
Check monitor time, and reset clock if necessary.
Attempt to collect data within the gap.
Contact your regional ADS representative.